- 8 -
It is important to be aware of how your Quantum storage heater has been installed electrically. If you Quantum has
only one electrical connection, it must be carefully confi gured to work with your o -peak electricity tari .
Available fi xed charge times must be manually programmed into the heater to tell it when to charge; no external
timers or contactors are needed. Up-to 4 digital charge times can be set.
If charge times are not programmed into the heater, the default times will be used which are set-up by default to
support dual-supply installations: 00:00 – 00:00 or 24h charge window.
A 24h charge window in a single supply installation will cause the heater to charge continuously,
including times when o -peak electricity is not available, resulting in larger bills.
Single Supply
NOTE:
If electricity tari charge times have changed, the digital charge times in the heaters settings must be
checked to ensure they match.
Operating Instructions
150
mm
150
mm
250 mm
300 mm
Product Clearances
WARNING:
DO NOT PLACE OBJECTS
WITHIN 300mm OF THE
FRONT OF THE HEATER
AND 150mm EITHER SIDE
To Next Page
Loading...
Need help?
General
