Dish Network Wireless Joey Getting Started Guide

11
Connecting to Home Network
Connect cable(s) to the appropriate connection
on the back of the Wireless Joey receiver. This
receiver supports HDMI technology or RCA-
type connections.
Connect the other end of the cable to the
appropriate input of your TV or monitor.
Conrm that both your TV and the Wireless
Joey receiver are connected to a power outlet.
Note: In most cases, connecting the HDMI
cable provides plug-and-play control of the
TV’s display resolution and other settings.
However, your TV may require selecting a
different format to display from the Wireless
Joey receiver during setup.
Do not cover the vents or stack
anything on the Wireless Joey
receiver. Covering the vents or
stacking anything on the Wireless
Joey receiver can cause heat
build-up, which voids the Limited
Warranty.
1
2
The Wireless Joey receiver uses Wi-Fi to connect to a Wireless Joey
Access Point, which uses an Ethernet connection to connect to your
Home Network, making it possible to share programming and recorded
content.
Note: Using the Wireless Joey Access Point Installation Instructions, set
up your Wireless Joey Access Point rst before starting this procedure.
Continued on the next page

Dish Network Wireless Joey Specifications

General

Brand	Dish Network
Model	Wireless Joey
Category	TV Receiver
Language	English