LOCATE
REMOTE
25
Locating the Remote
Press LOCATE REMOTE on the front panel
of the Wireless Joey receiver.
If the missing remote control is paired to
this Wireless Joey receiver and within radio
frequency (RF) range, there should be a
series of tones you hear to help nd the
location of the remote. It may take up to 30
seconds after touching LOCATE REMOTE
before you hear the tones. Press any button
on the remote to turn off the Locate tones
after nding the remote.
If you do not hear any tones after pressing
LOCATE REMOTE, press the SYSTEM
INFO button on the front panel. The
System Info screen lists the paired
remote(s). If the remote control you want
to nd is not listed or it is not paired to the
Wireless Joey receiver, using LOCATE
REMOTE is not an option.
If the remote control you want to nd is out
of RF range, LOCATE REMOTE is not an
option.
When you are looking for the remote, try the LOCATE REMOTE feature
on the front panel of the Wireless Joey receiver.
1
2
To Next Page
Loading...
Need help?
General
