Ditch Witch RT80Q User Manual

RT80Q Operator’s Manual Operation Overview - 69
Sawing
CMW
Sawing
1. Start unit. See page 78.
2. Position tractor and controls. See page 114.
3. Begin sawing. See page 114.
4. Complete the installation. See page 139.
5. Backfill the trench. See page 140.
6. Shut down tractor. See page 81.
Digging with Backhoe
1. Start unit. See page 78.
2. Set stabilizers and unstow backhoe. See page 118.
3. Excavate. See page 119.
4. Stow backhoe properly. See page 120.
5. Shut down tractor. See page 81.
Drilling
1. Start unit. See page 78.
2. Dig approach trench and target trench. See page 125.
3. Assemble drill string and position tractor. See page 126.
4. Begin drilling. See page 127.
5. Use drill string guide as needed. See page 127.
6. Add rod. See page 128.
7. Backream. See page 128.
8. Shut down tractor. See page 81.
9. Disassemble joints. See page 129.
Leaving Jobsite
1. Backfill if necessary. See page 140.
2. Rinse equipment. See page 140.
3. Stow tools. See page 140.
4. Haul equipment from jobsite. See page 90.

Ditch Witch RT80Q Specifications

General

Brand	Ditch Witch
Model	RT80Q
Category	Tractor
Language	English