42
EN
Refrigerator
6.8 Installing the door panels
RM2351, RM2354, DM2652, DM2662, DM2663, DM2672, DM2682, DM2683, DM2852,
DM2862, DM2872, DM2882, RM2451, RM2454, RM2551, RM2554
76
Door
Frame
Panel
Decoration
Strip
Decoration
Strip
Screws
Door Door
➤ Open the door 90 degrees.
➤ Locate the decoration strips taped to one of the shelves or to the inside of the door.
➤ Insert the vertical edges of the door panel into the grooves of the door frame.
➤ Push the panel downwards so that the lower horizontal edge of the panel is fitted into the bottom groove.
➤ Secure the decoration strips by using three screws, or by snapping them in, depending on the model.
RM3762, RM3962
77
Handle
Decoration
Strip
Door Panel
➤ Remove the handle using a flat-bladed screwdriver to push the tabs away.
➤ Insert a finger into the plastic profile and pull to remove the decoration strip.
➤ Open the door 90 degrees.
➤ Insert the door panel edges into the grooves of the door frame.
➤ Push the panel sideways until the edge of the panel is fitted into the opposite side groove.
➤ Snap on the decoration strip.
➤ Install the door handle.
To Next Page
Loading...
Need help?
General
