22 Quick reference guide | Atlan SW 2.0n
Getting started
4 Getting started
The quick reference guide does not replace the instructions for use. Any use of the
medical device requires full understanding and strict observation of the instructions for use.
4.1 Turning on the device
Prerequisite: The device has been reprocessed as per the reprocessing instructions and
assembled ready for operation.
1. Connect the device to the mains power supply.
2. Set the main switch to the position.
3. Press the key (1).
The device starts. The Standby page is displayed.
If there is sufficient battery charge, the device will also start without the power plug being
plugged in.
4. If necessary, define the required passwords for users and service personnel in the
displayed password dialog.
35026
To Next Page
Loading...
Need help?
General
