114
Driving
06
– First of all, the selection of all the functions
that you want to deactivate.
– Secondly, the simultaneous deactivation of all
these functions.
Selection of functions
► Press this button on the dashboard to
display the ADAS tabs.
► Select the Functions tab.
► Press this button to display the list of
available functions.
► Select the functions to deactivate (e.g.Stop
& Start, Lane Keeping Assist, Automatic Braking
System (Active Safety Brake)).
► Press this button to return to the
previous page.
The functions to deactivate are saved in the
system.
Deactivation of these functions
► Press and hold this button on
the dashboard.
All previously selected functions are deactivated
until the vehicle is next restarted (confirmed by an
audible signal).
Road signs recognition
For more information, refer to the General
recommendations on the use of driving
and manoeuvring aids.
This system displays the maximum speed
authorised locally on the instrument panel, using:
– Speed limit signs detected by the camera.
– Speed limit information from the navigation
system’s mapping.
– Signs indicating a shared traffic zone detected
by the camera.
Sign detected Suggested speed
(calculated)
Entry into a shared
traffic zone
Example:
WithoutDS IRIS
SYSTEM
10 mph or 20km/h
(depending on
the units on the
instrument panel)
With DS IRIS SYSTEM
Display of the speed
in force in the country
you are driving in.
– Some supplementary traffic signs detected by
the camera.
Supplementary
traffic sign detected
Display of thespeed
associated with
the supplementary
traffic sign
Speed limit when
raining
Examples:
If the wiper control
stalk is in the
"intermittent wipe"
or "automatic wipe"
position (in order
to activate the rain
sensor):
68 mph (110km/h)
(for example)
Speed limit when
towing
If an approved towing
device is fixed to the
vehicle:
56 mph (90km/h)
(for example)
Speed limit
applicable over a
certain distance
Example:
43 mph (70km/h)
(for example)
To Next Page
Loading...
Need help?
General
