Quick Setup
1
Plan
Plan the installation including all alarm detection devices,
zone expanders, keypads and other required modules.
2
Mount Decide on a location for the alarm panel and secure it to the
wall using suitable mounting hardware.
3
Wire Complete all wiring including modules, zones, bells/sirens,
telephone line connections and ground connections. Record
module serial numbers on page 19.
4
Power Connect the battery and power up the system. The battery
must be connected.
5
Enroll
First
Keypad
Hardwired: Wire the keypad to the Corbus, power up the
alarm panel then press any button on the keypad. Wireless:
Wire the HSM2Host to the Corbus, then power up the alarm
panel and a wireless keypad. Press any button on the keypad to
enroll it. The HSM2Host is then enrolled on the alarm panel.
Alternately, enroll an RF keypad.
6
Enroll
modules
[*][8][Installer Code][902] subsection [000]. Press [*] to
begin auto-enrollment. Module slots are automatically
assigned. Use scroll keys to view slots. Change slot by typing a
2-digit number.
7
Enroll
wireless
devices
[*][8][Installer Code][804] subsection [000]. Note: An
HSM2HOST or RF keypad must be enrolled first.
8
Program Basic programming: [*][8][installer code] [001]/[002]> Zone
Type/Zone Attribute [005]>[001] Partition 1 Timers: – Entry
Delay 1 – Entry Delay 2 – Exit Delay [301]>[001] Phone #1
[310]>[000] System Account Code.
9
Test Test the panel completely to ensure that all features and
functions operate as programmed. – [901] Walk Test – [904]
[000] Wireless Placement Test.
Compatible Devices
Throughout this document, x in the model number represents the
operating frequency of the device as follows: 9 (912-919 MHz), 8
(868MHz), 4 (433MHz).
Table 1-1 Compatible Devices
Modules
Wireless keypads: HS2LCDWFx
HS2LCDWFPx
HS2LCDWFPVx
Hardwired keypads with 2-way wireless
integration module:
HS2LCDRFx
HS2LCDRFPx
HS2ICNRFx
HS2ICNRFPx
Hardwired keypads: HS2LCD
HS2LCDP
HS2ICN
HS2ICNP
HS2LED
Touchscreen Keypad
HS2TCHP
2-way wireless integration module: HSM2HOSTx
8-zone expander: HSM2108
8-output expander: HSM2208
Power supply: HSM2300
4 high current output expander: HSM2204
Alternate communicator: 3G2080E
3G2080RE
TL280E
TL280RE
TL2803GE
TL2803GRE
PCL-422
Hardwired Devices
2-wire smoke detectors: FSA-210x
FSA-210xT
FSA-210xS
FSA-210xST
FSA-210xLST
FSA-210xR
FSA-210xRT
FSA-210xRS
FSA-210xRST
FSA-210xLRST
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
4-wire smoke detectors: FSA-410x
FSA-410xT
FSA-410xS
FSA-410xST
FSA-410xLST
FSA-410xR
FSA-410xRT
FSA-410xRS
FSA-410xRST
FSA-410xLRST
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
CO detectors: CO-12/24
12-24SIR
FW-CO12
FW-CO1224
CO1224
Wireless Devices
Wireless PG smoke detectors PGx926
Wireless PG smoke and heat detector PGx916
Wireless PG CO detector: PGx913
Wireless PG PIR motion detectors: PGx904(P)
Wireless PG PIR + camera motion detector PGx934(P)
Wireless PG curtain motion detector PGx924
Wireless PG dual tech motion detector PGx984(P)
Wireless PG mirror motion detector PGx974(P)
Wireless PG outdoor motion detector PGx994
Wireless PG glass break detector: PGx912, PGx922
Wireless PG shock detector: PGx935
Wireless PG flood detector: PGx985
Wireless PG temperature detector (indoor use): PGx905
Outdoor temperature probe (requires PGx905) PGTEMP-PROBE
Wireless PG keys: PGx939
PGx929
Wireless PG panic key PGx938
Wireless PG 2-button key PGx949
Wireless PG sirens: PGx901
PGx911
Wireless PG repeater: PGx920
Wireless PG door/window contacts: PGx975
Wireless PG door/window contact w/ AUX PGx945
Central Station Receivers
SG-System I, II, III, IV, 5
Enclosures
PC5003C, PC4050CR, PC4050CAR, CMC-1, PC4051C. Other enclosures are available to suit a variety
of system configurations.
WARNING: This manual contains information on limitations regarding product use and function and information on
the limitations as to liability of the manufacturer. The entire manual should be carefully read.
To download the full installation and user manuals and register your product, please visit:
www.DSC.com/m/29009812 or scan the QR code to the right.
PowerSeries Neo Alarm Control Installation Guide