EasyManuals Logo
Home>DSC>Security System>Power832PC5010 CP-01

DSC Power832PC5010 CP-01 User Manual

DSC Power832PC5010 CP-01
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1
Section 1: Introduction
1.1 About the PC5010 CP-01 System
The PC5010 CP-01 is a high end security system. It sup-
ports up to 32 zones, 2 separate partitions, and 32 users.
The user interface is simple and easy to use. The
LCD5500Z/LCD5520Z keypad guides users through
their available options with easy-to-understand prompts.
The status of the PC5010 CP-01 system can be monitored
over telephone lines, or using an alternative communicat-
ing device, including LINKS1000, LINKS2X50,
LINKS3000, Skyroute™ and DVACS*.
The PC5010 CP-01 main board comes with 2 programma-
ble outputs, and you can add up to 12 more using PC5204
and PC5208 modules. You can program the outputs to
control things such as doorstrikes and lights, using 25 dif-
ferent output options. See ‘Programmable Outputs’ in
Section 5.
You can program the PC5010 CP-01 using any system
keypad, or using DLS2002 downloading software and a
computer. See ‘How to Program’ on page 10.
Review the complete PC5010 CP-01 manual set before
installing the PC5010 CP-01 security system.
1.2 About the PC5010 CP-01 Manual Set
Installer Manuals
Read the entire manual carefully before beginning your
installation.
This manual describes:
An overview of the system (Section 1: ’Introduction’)
How to install and wire the system and its modules
(Section 2: ’Installation and Wiring’)
How to program the system (Section 3: ’How to Pro-
gram’)
An introduction to the user interface and keypad oper-
ation (Section 4: ’Keypad Commands’)
An overview of the main system programming sec-
tions (
Section 5
: ’Programming Sections’).
Be sure to record all your system programming in the
Pro-
Pro-Pro-
Pro-
gramming Worksheets
gramming Worksheetsgramming Worksheets
gramming Worksheets
.
If you will be adding modules to your PC5010 CP-01 sys-
tem, read the
Installation Instructions
Installation InstructionsInstallation Instructions
Installation Instructions
that come with each
module.
User’s Guide
One User’s Guide comes with the PC5010 CP-01 system.
The
User’s Guide
User’s GuideUser’s Guide
User’s Guide
provides easy to follow instructions for
end-users. Installers should also review this manual, in
order to properly instruct the end-users once the installa-
tion is complete.
1.3 Main Panel Specifications
Flexible Zone Configuration:
8 fully programmable zones
39 access codes: 32 user, 1 system master, 2 supervisor
codes, 2 duress, 1 maintenance and 1 installer code
Expandable to 32 zones
Keypads with zone inputs available (PC5508Z,
PC5516Z, PC5532Z, LCD5500Z/LCD5520Z, and
LCD5501Z)
Hardwired expansion available using the PC5108 8-
zone expansion module, the PC5100 addressable 32
zone expansion module and the PC5700/5720 fire
module
Wireless expansion available using the PC5132 wire-
less 32 zone expansion module (433 or 900MHz, fully
supervised)
Normally closed, Single EOL, or Double EOL zone
supervision
34 zone types, 8 programmable zone options
Up to 2 partitions
Audible Alarm Output:
700mA supervised bell output (current limit 3 Amps),
12 V
DC
Steady or pulsed output
EEPROM Memory:
Will not lose programming or system status on com-
plete AC and battery failure
Programmable Outputs:
Up to 14 programmable outputs 21 programmable
options
One low current (50mA) PGM output on main panel
(PGM1)
One high current (300mA) PGM output with 2-wire
smoke detector capability on main panel (PGM 2)
Eight additional low current (50mA) PGM outputs avail-
able using the PC5208 module
Four high current (1 Amp) PGM outputs available using
the PC5204 module (1 PC5204 output, fully supervised
for siren output)
Powerful 1.5 Amp Regulated Power Supply:
550 mA auxiliary supply, 12 V
DC
Positive temperature coefficient (PTC) components
replace fuses
Supervision for loss of AC power, low battery
Internal clock locked to AC power frequency
NOTE:
For 24-hr standby, maximum Aux capacity is 420mA.
Power Requirements:
Transformer = 16.0 V
AC
, 40VA (min) permanently
connected
Battery = (2) 12V 7Ah (min.) rechargeable sealed lead
acid or (1) 12 volt 4Ah battery (for Burglary applications
only)
PC5010 CP-01 current draw: 65mA
Remote Keypad Specifications:
Various keypads are available:
- PC5508Z 8 Zone LED keypad
- PC5516Z 16 Zone LED keypad
- PC5532Z 32 Zone LED keypad
- LCD5500Z/LCD5520Z Liquid Crystal Display keypad
- LCD5501Z LCD-style keypad
- LCD5501Z32-900/LCD5501Z32-433 keypad/receiver
’Z’ version keypads have one zone input
Each keypad has 5 fully programmable function keys
Connect up to 8 keypads
Four wire (Quad) connection to Keybus
Built in piezoelectric buzzer
*DVACS is a registered trademark of Electro Arts Limited.
WWW.DIYALARMFORUM.COM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC Power832PC5010 CP-01 and is the answer not in the manual?

DSC Power832PC5010 CP-01 Specifications

General IconGeneral
BrandDSC
ModelPower832PC5010 CP-01
CategorySecurity System
LanguageEnglish

Related product manuals