Operation
When the ignition key is turned to OFF, the
immobilizer inhibits engine operation.
When the ignition key is turned back to ON to start
the engine, the following happens:
1) if the code is recognised, the immobilizer enables
engine ignition. Press the START button (5), to
start the engine;
2) if code is not recognised, the instrument panel
will automatically activate the PIN entering
function. Refer to the PIN code Entering
procedure to unlock the vehicle. If the other key
does not work out either, contact the Ducati
Service network.
Fig. 60
Warning
Strong impacts could damage the electronic
components inside the key. During the procedure
always use the same key. Using different keys may
prevent the system from acknowledging the code of
the inserted key.
108
To Next Page
Loading...
Need help?
General
