Menu 1 functions: Partial fuel reserve
counter (TRIP FUEL)
This function shows the distance travelled (km or
miles, based on the specific application) on fuel
reserve. As soon as the fuel reserve warning light
comes on, whatever the displayed function, the TRIP
FUEL will be automatically enabled; afterwards the
other functions of Menu 1 can be scrolled by pressing
button (2).
Trip fuel reading remains stored even after Key-Off
until the vehicle is refuelled. Count is interrupted
automatically as soon as fuel is topped up to above
minimum level. When the reading exceeds 9999.9,
distance travelled is reset and the meter
automatically starts counting from 0 again.
When the TRIP FUEL function is disabled, the
corresponding page inside Menu 1 will not be
available.
To Next Page
Loading...
Need help?
General
