EasyManuals Logo
Home>Ducati>Motorcycle>Hyperstrada

Ducati Hyperstrada User Manual

Ducati Hyperstrada
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
With fixed drilled steel disc.
Disc diameter: 245 mm.
Hydraulically operated by a pedal on RH side.
Make: BREMBO
Type: P34e.
Friction material: FERIT I/D 450 FF.
Master cylinder type: PS 11.
Warning
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
Transmission
Multiplate wet clutch controlled mechanically, by the
lever on left-hand side of the handlebar. Self-servo
and slipper mechanism.
Drive is transmitted from engine to gearbox main
shaft via spur gears.
Engine sprocket/clutch gearwheel ratio: 33/61
6-speed gearbox with constant mesh gears, gear
change pedal on left side of motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/45
Total gear ratios:
1
st
gear 15/37
2
nd
gear 17/30
3
rd
gear 20/28
4
th
gear 22/26
5
th
gear 23/24
6
th
gear 24/23
Drive chain from gearbox to rear wheel:.
Make: DID
Type: 252 VAZ
Size: 5/8” x 1/16”
Links: 108
Important
The above gear ratios are the homologated ones
and under no circumstances must they be modified.
However, if you wish to tune up your motorcycle for
competitions or special tracks, Ducati Motor Holding
S.p.A. will be pleased to provide information about
the special ratios available. Contact a Ducati Dealer or
Authorised Service Centre.
208

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ducati Hyperstrada and is the answer not in the manual?

Ducati Hyperstrada Specifications

General IconGeneral
BrandDucati
ModelHyperstrada
CategoryMotorcycle
LanguageEnglish

Related product manuals