SETTING MENU
This menu is used to set/enable some motorcycle
functions.
To access the Setting Menu, keep button (2) pressed
for two seconds; once this menu is accessed it will
no longer be possible to scroll functions on the
Display.
Important
For safety reasons, the setting menu can be
accessed only when vehicle speed is below or equal
to 20 Km/h; if this menu is accessed and vehicle
speed is above 20 Km/h, instrument panel will
automatically quit it and shift back to "main" screen.
Setting menu includes:
- riding mode customisation (R.MODE);
- backlighting adjustment (B.LIGHT);
- lap time activation and displaying (LAP);
- PIN CODE activation and editing (PIN);
- clock setup (CLOCK);
- measurement unit setup (UNITS);
- battery voltage indicator (BATT.)
- Engine RPM indicator (RPM);
- error indicator, only if one or more errors are
present (ERRORS);
- EXIT.
To quit the setting menu, use buttons (1) and (2) to
highlight the "EXIT" wording, then press button (4).
59
To Next Page
Loading...
Need help?
General
