Hazard
All the turn indicators can be turned on together
(Hazard function) as emergency indicator.
To enable the Hazard function (4 turn indicators) keep
the button generally used to activate LH turn indicator
(button (4) in position (6)) pressed for 3 seconds.
The Hazard function can be enabled during Key-On
only (and not Key-Off).
When the Hazard function is active, both warning
lights (7) on the instrument panel will flash at the
same time.
To disable the hazard function, namely to turn all 4
turn indicators off, simply press the button generally
used to activate the LH turn indicator (button (4) in
position (6)) or press the turn indicator cancel button
(button (4) in central position).
The Hazard function can be disabled also during Key-
Off by pressing just once the button generally used
to activate the LH turn indicator (button (4) in position
(6)).
Fig. 63
After the Hazard function has been enabled, if ignition
switch is turned from On to Off, the 4 turn indicators
will remain active and turn automatically off after 120
minutes (2 hours), unless "manually" turned off: in this
case the automatic count-down will be interrupted.
112
To Next Page
Loading...
Need help?
General
