71
E
Frame
Tubular trestle frame with upper section made of high-
strength steel.
Steering angle (on each side):
27°
Steering head angle:
24°
Trail mm:
96
Wheels
Three-spoke, light-alloy rims.
Front
Make:
BREMBO
Dimensions:
MT3.50x17"
Rear
Make:
BREMBO
Dimensions:
MT4.50x17"
Both wheel shafts can be removed.
Tyres
Front
Tubeless, radial tyre.
Size:
120/60-ZR17
Rear
Tubeless, radial tyre.
Size:
160/60-ZR17
Suspensions
Front
Hydraulic upside-down fork.
Stanchion tubes diameter: 43 mm.
Travel on leg axis: 130 mm.
Rear
Of the progressive type, thanks to a rocker arm connecting
frame and upper pivot point of the shock absorber. The shock
absorber features rebound damping and spring preload
adjustment. Its bottom end pivots on a swingarm in steel.
The swingarm hinges on a pivot pin passing through the
engine. The whole system gives the bike excellent stability.
Shock absorber stroke: 65 mm.
Rear wheel travel: 148 mm.
Note
Homologation depends on certain technical
specifications, do not perform any service operation that
might change them.
To Next Page
Loading...
Need help?
General
