Duplo DB-250 User Manual

11
4. Place the cover sheet onto the nipping station
when the display flashing "LOAD COVER".
The clamp station will automatically move
back to the position above the nipping station
and start the binding process for the book
block and cover sheet.
Note:
If you accidentally remove or drop the cover
sheet during the clamping station return to
the nipping station, the control panel will
show “COVER?”. At this moment, you have
to place the cover on the nipping station and
press "START" button to recover the process.
Having completed one bound book, the
clamp will automatically open and display
"UNLOAD" so that you can remove the
finished book from the right end. Meanwhile,
the LED display of control panel will count
once for the total binding amount as shown.
The DB-250 will flash "LOAD BOOK"
display.
5. Place the same thickness of book block onto
the clamp as the label instructions on the
clamp. The clamp station will automatically
clamp down the book block and move to the
left. Repeat step 5 to 4 for more books in
“AUTO” operation.

Duplo DB-250 Specifications

General

Brand	Duplo
Model	DB-250
Category	Binding Machine
Language	English