33
4. BINDING
Check how much the stapled sets of
paper have deviated from their actual
positions, and adjust by rotating the two
knobs of the folding stopper.
If the sets deviate as shown in the figure,
move the folding stopper to the arrow
direction.
5
Staples
Folding
position
Paper
conveyance
direction
If the sets deviate as shown in the figure,
move the folding stopper to the arrow
direction.
Folding
position
Staples
Paper
conveyance
direction
* When the knobs are rotated 180˚ from
the top to bottom, the folding stopper
will be moved by 3 mm.
Basically, the knobs will move left and
right for the same amount, but the
amount moved will differ according to
the paper used and environment.
If the width between the stoppers is in
appropriate, while checking that the
stapling and folding positions do not
deviate, move and finely adjust the
knobs.
(To convey paper, tighten the cap
screws of step “6”.)
To Next Page
Loading...
Need help?
General
