Duplo DBM-100 User Manual

7
No. Name Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
When this cover is opened during operations, the unit will make emergency
stops.
In the automatic mode, turn the power on after upstream processing devices
being powered (such as collator, etc.).
Refer to “3-3. Control Panel”.
Conveys saddle-stapled and center-folded paper to the paper receiving tray.
Guides saddle-stapled and center-folded paper.
Stocks saddle-stapled and corner-folded paper.
Stocks side-stapled and corner-stapled paper.
Slot for inserting paper in the manual mode.
Slot for receiving the sets of paper from the upstream processing devices in
the automatic mode.
Be sure to connect to the wall outlet.
Signal cable for connecting to the upstream processing devices in the
automatic mode.
Moves the main unit to align the upstream processing devices and paper line.
Fixes the movable table.
Used for side-stapling and corner-stapling the paper.
Used for side-stapling and corner-stapling the paper.
Measures the paper size.
Used when setting the position of the paper guide roller “5”.
Holds the paper sets ejected.
3. NAMES AND OPERATION OF PARTS
Top cover
Power switch
Control panel
Belt conveyance unit
Paper guide roller unit
Saddle-stapled
paper receiving tray
Side-stapled paper
receiving tray
Manual feed slot
Paper infeed slot
Power cord
Connecting cable
Movable table
Level adjuster
Guide unit
Paper holding
guide unit
Scale label
Paper guide roller
position label
Paper holder

Duplo DBM-100 Specifications

General

Brand	Duplo
Model	DBM-100
Category	Folding Machines
Language	English