Dyson gen5 detect User Manual

Cleaning your bin
Remove your bin
Refit your bin
clik
clik
click
click
If you need to clean your bin, empty it as shown in the ‘Emptying your bin’
section.
Press the red button located on the bin runner to release the bin and slide
your bin off the runner.
Clean your bin using a damp, lint-free cloth.
Make sure that your bin and seals are completely dry before refitting.
Your bin isn’t dishwasher safe and the use of detergents, polishes or air
fresheners to clean your bin isn’t recommended, as it may damage
your machine.
Insert the spine on to the bin runner.
Close your bin by pushing the bin base upwards until the bin and bin base
click into place.
The bin being removed
and the location of the
bin release lever on the
underside of the bin runner.
The bin being
pushed back into
position on the bin
runner.
The bin base
being closed as
the bin is slid
back onto its
runner and into
position.

Dyson gen5 detect Specifications

General

Cleaning type	Dry
Vacuum air filtering	HEPA
Dirt separating method	Cyclonic
Product color	Purple
Dust container type	Bagless
Power source	Battery
Charging time	4.5 h
Suction power	262 AW
Battery voltage	- V