The LCD screen
Settings menu
Change language
For more information and support for your machine go
online: https://support.dyson.com.sg/SupportHome.aspx
Control the settings on your machine using the Selection button.
To enter the settings menu, press and hold the button until the menu
screen appears. Press the button to move through the options within
the settings menu.
Hold the button to open an option.
– Language
– Alerts
– Serial numbers
To change the language on your screen, press the Selection button and hold
it until the language list appears. Release the button.
Tap the Selection button to scroll through the language list to your preferred
language. Press and hold the button until the countdown ends.
A green tick will appear on the screen to show your language selection
is complete.
To cancel your selection, release the button during the countdown.
Find your serial numbers
You can find your serial numbers in the settings menu.
Press the Selection button to move through the settings sequence
until you reach Serial numbers.
Press and hold the button to select this option.
Press the button to move through your serial numbers information.
The Selection button on
the screen being pressed.
Two screens,
the first with
the language
list and then
the tick screen
to show that
the language
has been
successfully
changed.
In the settings menu, the Language
option allows you to select your
screen’s language preference.
In the settings
menu, the
Language
option allows
you to select your
screen’s language
preference.
In settings, the
third screen option
allows you to view
Serial numbers.
The Exit menu
screen is the final
option in settings.
In settings, the
Alerts option allows
you to set the on-
screen allerts to
On or Off.
The Serial numbers screen
is the option for searching
for your serial numbers.
To Next Page
Loading...
Need help?
General
