Minimise dust contact
Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your
machine when the dirt is above the MAX line may affect the performance
and require more frequent filter washing.
Emptying your bin
Hold the machine over the bin, pointing downwards.
Firmly push the red bin release button. The bin will slide down, cleaning the
shroud as it goes, and the bin base will open.
The bin base won’t open if the red bin release button isn’t pushed down all
the way.
Release the dirt
Close the bin
Push the bin base upwards until your bin and bin base click into place.
Remove your wand
Overfilling your bin could result in inaccurate readings on the particle graph.
Press the grey wand release button, on the top of the wand, and pull the wand
away from the bin.
Make sure your machine power is turned off before removing your wand or
releasing the bin.
click
Cover your bin tightly in a dustproof bag while you empty. Remove your bin
carefully, seal the bag tightly and dispose.
The bin lid closing
with an audible click
and the bin being
pushed upwards with
another click once it
is fully in place.
Illustration of
the bin being
emptied into
a bag.
To Next Page
Loading...
Need help?
General
