Dyson gen5 detect User Manual

Clean filter
Your filter needs cleaning. Please refer to ‘Washing your filter’.
After cleaning, leave to dry for at least 24 hours before
reattaching it to your machine.
Filter not sealed
Your filter isn’t properly fitted. Twist your filter anti-clockwise
and pull it away from your machine. Reattach to your machine,
twisting it clockwise until it locks into place.
+
24h
Learn more about your LCD screen. View video on your owner’s page.
Filter needs
cleaning
Filter not
sealed
Change alert settings
You can turn the alert motor pulse off. Your motor will no longer pulse but
run time alert information will continue to be displayed on the LCD screen
when your machine needs your attention.
Turning off alerts will not turn off the blockage alert pulsing. This is to ensure
you clear any blockages, preventing damage to your machine.
Make sure you have entered the settings menu. Tap the Selection button to
move through the options within the settings menu. Press and hold the button
to select the ‘Alerts’ option.
Tap the button until your selection is highlighted. Hold it down until the
countdown ends and a tick appears on the screen. To cancel your selection,
release the button during the countdown.
Off
Exit
On
Alerts
On
Alert icon with a filter
graphic and ‘24+’
reminds you to leave
your filter to dry for
24hrs after washing.
The Alert settings
menu reads
On, Off, Exit.
The Alerts screen
allows you to choose
On or Off.
Alert icon with
‘Filter not sealed’
wording.
Alert icon with
‘Filter needs
cleaning’ wording.

Dyson gen5 detect Specifications

General

Cleaning type	Dry
Vacuum air filtering	HEPA
Dirt separating method	Cyclonic
Product color	Purple
Dust container type	Bagless
Power source	Battery
Charging time	4.5 h
Suction power	262 AW
Battery voltage	- V