OPERATION
Eaton 5125 Tower UPS (1000â2200 VA) User's Guide S 05147304 Rev C www.eaton.com/powerquality
33
Battery Mode
When the UPS is operating during a power outage, the alarm beeps
once every four seconds and the
+
-
indicator illuminates.
When utility power returns, the UPS transfers to Normal mode operation
while the battery recharges.
If battery capacity becomes low while in Battery mode, the
indicator
flashes and the alarm beeps twice every two seconds. Immediately
complete and save your work to prevent data loss and similar difficulties.
When utility power is restored after the UPS shuts down, the UPS
automatically restarts.
Standby Mode
When the UPS is turned off and remains plugged into a power outlet,
the UPS is in Standby mode. The
î
indicator flashes and the bar graph
indicators are off, indicating that power is not available to your
equipment. The battery recharges when necessary.
NOTE For 230V models, the output receptacles may remain electrically live (up to 115V).
Unplug the UPS to ensure power is not available to the output receptacles.
To Next Page
Loading...
Need help?
General
