Eaton 5E User Manual

DSD-5E2206
1
1 Special symbols
The following are examples of symbols used on the UPS or accessories to alert you to importantinformation:
DANGER: Dangerous voltage levels are present within the UPS. The UPS has its own internal power
source (the battery). Consequently, the power outlets may be energized even if the UPS is disconnected
from the AC power source.
Important instructions that must always be followed.
CAUTION: Batteries present a risk of energy or electrical shock or burn from high short circuit current.
Observe proper precaution. Batteries may contain HIGH VOLTAGE and CORROSIVE, TOXIC and
EXPLOSIVE substances.
Information, advice, help.
Read the documentation provided.
Disconnect input plug.
Before maintenance, first shut down the UPS then disconnect the AC power source, internal and
external batteries then discharge capacitors by pressing the ON button and wait 5 minutes.
This equipment should only be used in a dry indoor environment.
Operating range of temperature.
Operating range of humidity.
The UPS and their batteries must be kept in a ventilated place.


Eaton 5E Specifications

General

Noise level	45 dB
Output power	1200 W
UPS topology	Line-Interactive
Input frequency	50/60 Hz
Maximum current	10 A
Output power capacity	2 kVA
Surge protection features	Fax, Modem, Telephone
Input operation voltage (max)	280 V
Input operation voltage (min)	170 V
Output operation voltage (max)	- V
Output operation voltage (min)	230 V
Power plug	C14 coupler
AC outlet types	C13 coupler
AC outlets quantity	6 AC outlet(s)
USB 2.0 ports quantity	1
Battery voltage	12 V
Battery capacity	9 Ah
Battery recharge time	6 h
Number of batteries supported	2
Typical backup time at full load	50 min
Typical backup time at half load	26 min
Form factor	Tower
Certification	CE, CB
Product color	Black
LED indicators	Yes
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	330 mm
Width	133 mm
Height	180 mm
Weight	10460 g