Eaton 5E User Manual

DSD-5E2206
2
•
•
•
Materials Abbreviations
Number in the symbols
Polyethylene terephthalate PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06
2 Introduction
Thank you for selecting an Eaton 5E product to protect your electrical equipment.
TheEaton 5Erange has been designed with the utmost care. We recommend that you take the time to read this advanced
user guide to take full advantage of the many features of your UPS (Uninterruptible Power System).
Before installing yourEaton5E,please read the information and safety instructions provided. Follow the instructions in
the quick start guide and if necessary, refer to this advance user guide.
To discover the entire range ofEatonproducts, we invite you to visit ourweb siteateaton.comor
contactyourEatonlocal representative.
2.1 Environmental protection
Eatonhas implemented an environmental-protection policy. Products are developed according to an eco-design
approach.
Substances
This product does not contain CFC and HCFC. This product does not contain asbestos. This product is compliant with
regulations on the restriction of the use of substances in electrical and electronic equipment.
Packaging
To improve waste treatment and facilitate recycling, separate the various packing components.
The cardboard we use comprises over 50% of recycled cardboard.
Plastic bags are made of polyethylene.
Packing materials are recyclable and bear the appropriate identification symbol.
Follow all local regulations for the disposal of packing materials.
End of life
Eatonwill process products at the end of their service life in compliance with local regulations. Eatonworks with
companies in charge of collecting and eliminating our products at the end of their service life.
Product
The product is made up of recyclable materials. Dismantling and destruction must take place in compliance with all local
regulations concerning waste. At the end of its service life, the product must be transported to a processing center for
electrical and electronic waste.eaton.com/recycling

Eaton 5E Specifications

General

Noise level	45 dB
Output power	1200 W
UPS topology	Line-Interactive
Input frequency	50/60 Hz
Maximum current	10 A
Output power capacity	2 kVA
Surge protection features	Fax, Modem, Telephone
Input operation voltage (max)	280 V
Input operation voltage (min)	170 V
Output operation voltage (max)	- V
Output operation voltage (min)	230 V
Power plug	C14 coupler
AC outlet types	C13 coupler
AC outlets quantity	6 AC outlet(s)
USB 2.0 ports quantity	1
Battery voltage	12 V
Battery capacity	9 Ah
Battery recharge time	6 h
Number of batteries supported	2
Typical backup time at full load	50 min
Typical backup time at half load	26 min
Form factor	Tower
Certification	CE, CB
Product color	Black
LED indicators	Yes
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	330 mm
Width	133 mm
Height	180 mm
Weight	10460 g