Eaton 5E User Manual

DSD-5E2206
6
1.
2.
4 Installation
4.1 Inspecting the equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or
place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for
concealed damage.
To file a claim for shipping damage or concealed damage:
File with the carrier within 15 days of receipt of the equipment;
Send a copy of the damage claim within 15 days to your service representative.
Check the battery recharge date on the shipping carton label. If the date has passed and the batteries were never
recharged, do not use the UPS. Contact your service representative.
Package content
Verify that the following additional items are included
with the UPS:
① UPS
⑬ Connection cable to AC power source (exceptfor IEC
models)
⑭ Connection cables for IEC models only
⑰ Instructions and Safety Informations
⑱Quick start

Eaton 5E Specifications

General

Noise level	45 dB
Output power	1200 W
UPS topology	Line-Interactive
Input frequency	50/60 Hz
Maximum current	10 A
Output power capacity	2 kVA
Surge protection features	Fax, Modem, Telephone
Input operation voltage (max)	280 V
Input operation voltage (min)	170 V
Output operation voltage (max)	- V
Output operation voltage (min)	230 V
Power plug	C14 coupler
AC outlet types	C13 coupler
AC outlets quantity	6 AC outlet(s)
USB 2.0 ports quantity	1
Battery voltage	12 V
Battery capacity	9 Ah
Battery recharge time	6 h
Number of batteries supported	2
Typical backup time at full load	50 min
Typical backup time at half load	26 min
Form factor	Tower
Certification	CE, CB
Product color	Black
LED indicators	Yes
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	330 mm
Width	133 mm
Height	180 mm
Weight	10460 g