Color LED indicators (UPM)
UPM status
UPM in stand-by, ESS or VMMS mode
UPM in shutdown state with active alarm(s)
UPM in all other states with active alarm(s)
77..22..33 SSyysstteemm eevveennttss
When the UPS system is running in the double conversion mode, it continually monitors itself and the
incoming utility power. In the battery or bypass mode, the UPS may issue alarms to let you know exactly
what event caused the change from the double conversion mode. System events on the UPS can be
indicated by horns, lights, messages, or all three.
Select Logs in the home screen to look at any currently active events.
• System event horn
The system event horn beeps to alert the user that an event requiring attention is taking place.
• System event indicators
The status indicators on the UPS control panel and the event horn let you know when the UPS system
is operating in any mode other than the double conversion mode. Only the green indicator for normal
operation is visible during normal UPS system operation. The other indicators illuminate to indicate
alarms or events. When an alarm occurs, first examine these indicators to see what type of event has
taken place.
• System event messages
When a system event occurs, a message appears in the status bar of the display. This message is also
written to the Active Events log. Some notices and alarms may be accompanied by an audible horn. To
silence the horn, press any button once.
77..22..44 MMeennuu ssttrruuccttuurree ooff tthhee 9933PPMM GG22 UUPPSS
The following table shows the menu structure of the 93PM G2 UPS.
Table 20. Menu structure of the 93PM G2 UPS
Main menu Submenu Functions
Home - An overview of the UPS operation, including information
on load, efficiency and consumption.
Meters Meters summary A summary of the UPS or system meters.
Input meters Detailed information on UPS or system input meters.
EATON 93PM G2 UPS USER’S AND INSTALLATION GUIDE P-164000956
-
February 2021 www.eaton.eu 7711
To Next Page
Loading...
Need help?
General
