Eaton EX 700 User Manual

5.2 Battery-Module Replacement
Safety recommendations
The battery can cause electrocution and high short-circuit currents. The following safety cautions are required
before servicing the battery components:
w Remove watches, rings, bracelets and all other metal objects from the hands and arms.
w Use tools with an insulated handle.
Battery-module removal
D Remove the metal protection cover in front of the
battery (two screws).
E Turn the connector.
F Pass the connector through the hole.
RT model
B
A
C
A Unscrew the left-hand side of the front panel (two
screws).
B Remove the part.
C Disconnect the battery block by separating the
two connectors (never pull on the wires).
F
E
D
86-86700-00EN A02 - Page 24
5. Maintenance

Eaton EX 700 Specifications

General

Noise level	45 dB
Output power	630 W
Input frequency	40/70 Hz
Output power capacity	0.7 kVA
Input operation voltage (max)	284 V
Input operation voltage (min)	100 V
Output operation voltage (max)	250 V
Output operation voltage (min)	200 V
Power plug	C14 coupler
AC outlet types	C13 coupler
AC outlets quantity	6 AC outlet(s)
USB 2.0 ports quantity	1
Safety	IEC/EN 62 040-1, IEC/EN 62 040-2, IEC/EN 62 040-3 (VFI-SS-113), IEC/EN 60 950-1 (RD)
Form factor	Tower
Product color	Gray
LED indicators	Yes
Typical backup time at full load	- min
Typical backup time at half load	16 min
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Depth	440 mm
Width	153 mm
Height	242 mm
Weight	12500 g