Eaton MX 5000 RT User Manual

34008030EN/AD - Page 27
4. Access to measurements and personalisation data
Battery settings
4.5 Maintenance
4.6 Personalisation using external software
Function Factory setting Options Comments
Auto Battery Test Everyweek No test / everyday /
everyweek /everymonth
Low Batt Warning 20% 0 to 100% 1% increment
User Batt Settings UPS reads number of
battery modules
connected
From 0 to 40 Ah 5 Ah increment
Deep Disch Protect Yes No Protection against deep discharge.
If disable, EATON warranty will be
void
Function Sub-Function Option / Display Comments
Model Power Module SN: xxxxxxxxx
SOFT: xxx
Serial number
Soft version
Frame
Alarm History Read Description
Date Hour
Alarm xxx
10 alarms can be stored
automatically
Erase No / Yes
Manual Batt Test Manual Battery Test No / Yes
Led & Buzzer Test Led & Buzzer Test No / Yes
Life Cycle Monitoring LCM Enable / Disable Life cycling monitoring alarms
Statistics Auto Statistics Statistics
Custom Statistics Reset Date ?
Are you sure ?
Operation Limits Operation Limits Automatic alarms displayed when
UPS is operating near the limits
Start other UPS Start other UPS? No/Yes In parallel :
If yes, the load is transferred
without break* on the other UPS,
and the other UPS is enabled to
start alone (see section 5.3).
* Do not use this function on unitary UPS,
to avoid a load loss.
◗ Insert the Solution-Pac CD-ROM in the drive.
◗ On the first navigation screen, select "Point to Point solution" and follow the instructions on how to install the
Personal Solution-Pac software.
◗ Then select "Settings", "Advanced settings" and "UPS settings".
Note that only the Windows versions of the Personal Solution-Pac software offer this possibility.

Eaton MX 5000 RT Specifications

General

Brand	Eaton
Model	MX 5000 RT
Category	UPS
Language	English