21
Maintenance and care
Maintenance and care
Servicing guidelines
Maintenance and care
WARNING
Observe the following precautions when checking and maintaining your product after use:
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
IMPORTANT
Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
For spare parts and consumables, please use only genuine parts and designated products and components. Using parts from
other manufacturers or non-designated components may result in a malfunction.
Area Maintenance Page Before use Monthly
Air filter Clean/Replace 22 •
Fuel filter Inspect/Clean/Replace 22 •
Spark plug Inspect/Clean/Adjust/Replace 24 •
Carburettor Adjust/Replace and adjust 22 •
Cooling system Inspect/Clean 23 •
Silencer Inspect/Tighten 23 •
Silencer Clean 23 •**
Angle transmission Grease 24 •*
Starter Inspect - •
Cut off knife Inspect/Clean - •
Fuel system Inspect 22 •
Screws, bolts and nuts Inspect, Tighten/Replace - •
* Or 50 hours, whichever occurs first. ** Or 100 hours, whichever occurs first.
IMPORTANT
Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
If you have any questions or problems, please contact your dealer.
To Next Page
Loading...
Need help?
General