20
Installing the Motherboard
Connecting I/O Devices
The backplane of the motherboard has the following I/O ports:
PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device.
PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
VGA Port Connect your monitor to the VGA port.
USB Ports Use the USB ports to connect USB devices.
Audio Ports
LAN Port Connect an RJ-45 jack to the LAN port to connect your
computer to the network.
DVI Port
Connect the DVI port to connect the monitor.
Serial Port
(COM)
Use the COM port to connect serial devices such as mouse
or fax/modems.
Use the three audio ports to connect audio devices. The first
jack is for stereo line-in signal. The second jack is for stereo
line-out signal. The third jack is for microphone.
To Next Page
Loading...
Need help?
General
