36
Using BIOS
SMART FAN Control (Enabled)
Smart Fan Function
Scroll to this item and press <Enter> to view the following screen:
This item allows you to enable/disable the control of the system fan speed by chang-
ing the fan voltage.
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Smart Fan Function Press Enter
Shutdown Temperature (CPU) Disabled
Shutdown Temperature (NB) Disabled
CPU Temperature : 50°C/122°F
NB Temperature : 71°C/159°F
CPU Fan Speed : 2657 RPM
CPU Vcore : 1.312 V
VDIMM : 1.600 V
Case Open Warning Disabled
Chassis Open No
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
< >
-=- System Hardware Monitor -=-
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART Fan Control Enabled
SMART Fan Mode Normal
SMART Fan start PWM value 28
SMART Fan start TEMP.(°C) 27
DeltaT1 +3
SMART Fan Slope PWM value 3 PWM value/°C
CPU FAN Full Limit Temp 60°C
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
Normal: auto ajusts
depending on the CPU
temperature.
Quiet: auto minimizes
fan speed for quiet
environment operation.
To Next Page
Loading...
Need help?
General
