41
Using BIOS
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Supervisor Password
This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help Item
Supervisor Password :Not Installed
Change Supervisor Password Press Enter
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
Press <Esc> to return to the main menu setting page.
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then press <Enter>, the Setup Utility loads all default
values; or select [Cancel], and then press <Enter>, the Setup Utility does not load
default values.
DIMM Voltage (Disabled)
This item allows users to adjust the DIMM voltage.
AMD Phenom (tm) IIx3 740 Processor Speed (3000MHz)
This is display-only field and displays the information of the CPU installed in your
computer
.
NB Clk (2000MHz)
This item shows the current NB frequency.
Current CPU Frequency (3000MHz)
This item shows the current CPU frequency.
Current CPU Voltage (1.3250v)
This item shows the current CPU voltage.
Current NB Frequency (2000MHz)
This item shows the current NB Frequency.
To Next Page
Loading...
Need help?
General
