ECS G43T-WM User Manual

9
Installing the Motherboard
Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Jumper Type Description Setting (default)
CLR_CMOS 3-pin CLEAR CMOS
1-2: NORMAL
2-3: CLEAR
1-2: DISABLE
2-3: ENABLE
3-pin MED1
Before clearing the
CMOS, make sure to turn
off the system.
CLR_CMOS
1
1
MED1
ME Disable
To avoid the system instability after clearing CMOS, we recommend
users to enter the main BIOS setting page to “Load Default Settings”
and then “Save & Exit Setup”.

ECS G43T-WM Specifications

General

Brand	ECS
Model	G43T-WM
Category	Motherboard
Language	English