ECS G43T-WM User Manual

34
Using BIOS
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
Onboard SATA Mode (Enhanced)
Use this item to select the mode of the Serial ATA.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Integrated Peripherals
Help Item
Options
Disabled
Compatible
Enhanced
Onboard SATA Mode Enhanced
GbE Controller Enabled
GbE LAN Boot Disabled
Onboard AUDIO Function Enabled
Serial Port1 Address 3F8/IRQ4
Serial Port2 Address 2F8/IRQ3
Serial Port2 Mode Normal
USB Functions Enabled
Legacy USB Support Enabled
mnlk
: Move
F10: Save ESC: Exit
Enter: Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Serial Port1/2 Address (3F8/IRQ4)/(2F8/IRQ3)
Use these items to enable or disable the onboard COM1 serial port, and to assign a
port address.
GbE Controller (Enabled)
This item enables or disables you to control Onboard LAN by Onboard LAN Func-
tion.
GbE LAN Boot (Disabled)
This item enables or disables you to control Onboard LAN Boot ROM.
Serial Port2 Mode (Normal)
If Serial Port 2 Address is not disabled, it allows you to set the Serial Port 2 Mode.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Press <Esc> to return to the main menu setting page.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.

ECS G43T-WM Specifications

General

Brand	ECS
Model	G43T-WM
Category	Motherboard
Language	English