37
Using BIOS
Press <Esc> to return to the main menu setting page.
C6 State (Enabled)
Nehalem C state action select.
C1 Auto Demotion (Enabled)
When enable, CPU will conditionally demote C3/C6/C7 requests to C1 based onuncore
auto-demote information.
C3 Auto Demotion (Enabled)
When enable, CPU will conditionally demote C6/C7 requests to C3 based on
uncoreauto-demote information.
ACPI T State (Enabled)
Report processor throttling in ACPI
EUP Support (Enabled)
When enabled, system can not resume by some devices (PCI/PCIE/PME/Ring/RTC,etc)
at S5 state. You can use this item to save power.
PCI / PnP Setup
This page sets up some parameters for devices installed on the PCI bus and those
utilizing the system plug and play capability.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
PCI / PnP Setup
Init Display First PCI
Options
Select which
graphics controller
to use as the primary
boot device.
Init Display First (PCI)
Use this item to select which graphics controller to use as the primary boot devices.
Press <Esc> to return to the main menu setting page.
: Move F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
To Next Page
Loading...
Need help?
General
Weight and Dimensions
