EDAN SD5 User Manual

SD5/SD6 Ultrasonic TableTop Doppler User Manual EMC Information
- 37 -
A2.3 Electromagnetic Immunity
Guidance and manufacture’s declaration – electromagnetic immunity
The SD5/SD6 is intended for use in the electromagnetic environment specified below. The customer or
the user of SD5/SD6 should assure that it is used in such an environment.
Immunity
test
IEC 60601 test
level
Compliance level
Electromagnetic environment
-guidance
Portable and mobile RF communications
equipment should be used no closer to
any part of the SD5/SD6 , including
cables, than the recommended
separation distance calculated from the
equation applicable to the frequency of
the transmitter.
Recommended separation distance
Conducted
RF
IEC
61000-4-6
3 Vrms
150 z to 80 MHz
3Vrms
0.1 Vrms
1.995MHz~2.010MHz
2.985MHz~3.015MHz
d=1.2
P
d=35
P
1.995 MHz to 2.010 MHz
d=35
P
2.985 MHz to 3.015 MHz
Radiated RF
IEC
61000-4-3
3 V/m
80 MHz to 2.5 GHz
3 V/m
d=1.2
P
80 MHz to 800 MHz
d=2.3
P
800 MHz to 2.5 GHz
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter
manufacturer and d is the recommended
separation distance in metres (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,
a
should be
less than the compliance level in each
frequency range.
b
Interference may occur in the vicinity of
equipment marked with the following
symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.

EDAN SD5 Specifications

General

Brand	EDAN
Model	SD5
Category	Medical Equipment
Language	English