© Edwards Limited 2017. All rights reserved. Page 43
Edwards and the Edwards logo are trademarks of Edwards Limited.
Spares and accessories
A735-01-880 Issue C
7.3 Spares
7.3.1 Tip-seal kit (Youtube video https://www.youtube.com/watch?v=vKnh9dxOyhE)
Used to maintain or restore the performance of the pump. Refer to Section 5.10.
7.3.2 Cooling fan
Used to replace the cooling fan located inside the nXDS fan cowl. Refer to Figure 1, item 4.
7.3.3 Gas ballast knob
Replacement gas ballast control knob attached to the gas ballast control. Refer to Figure 1, item 3.
7.3.4 Silencer spares kit
Replacement spares for the nXDS silencer A505-97-000.
7.3.5 Inlet/exhaust filter spares
Replacement elements for the inlet/exhaust filter A505-97-805.
Table 25 - Tip-seal kit
Product description Ordering information
Tip-seal kit A735-01-801
Table 26 - Cooling fan
Product description Ordering information
Cooling fan A735-01-707
Table 27 - Gas ballast knob
Product description Ordering information
Gas ballast control knob A735-01-059
Table 28 - Silencer spares kit
Product description Ordering information
Silencer spares kit A505-97-800
Table 29 - Inlet/exhaust filter spares
Product description Ordering information
5 micron element A505-97-802
1 micron element A505-97-803
To Next Page
Loading...
Need help?
General
