Edwards nXDS Series User Manual

A735-01-880 Issue C
Page 44 © Edwards Limited 2017. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Spares and accessories
7.3.6 Bearing replacement kit (not field serviceable)
Used when the pump has reached a long run service interval. Specific training is required to replace the bearings on
nXDS pumps. See Section 5.7 for details of Edwards options for providing this training.
7.3.7 Exhaust and ballast valve kit
Used when the pump has reached a long run service interval.
Note: nXDS20i, nXDS20iR and nXDS20iC versions require two service kits per pump.
Table 30 - Bearing replacement kit
Product description Ordering information
Bearing replacement kit A735-01-802
Table 31 - Exhaust and ballast valve kit
Product description Ordering information
Exhaust and ballast valve kit (standard and R versions) A735-01-803
Exhaust and ballast valve kit (C versions only) A735-01-804

Edwards nXDS Series Specifications

General

Brand	Edwards
Model	nXDS Series
Category	Water Pump
Language	English