EasyManuals Logo
Home>Eizo>Monitor>FlexScan EV2736W

Eizo FlexScan EV2736W User Manual

Eizo FlexScan EV2736W
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
27.0″ wide format LCD
Supports a resolution of 2560 × 1440
IPS panel with 89˚ horizontal and vertical viewing angles
Applicable to DisplayPort (applicable to 8 bit)
*1
The DisplayPort input receives both an image signal and an audio signal via a single DisplayPort cable.
*1 When transmitting an audio signal using the DisplayPort cable, the graphics board must be compatible with audio
output (see “6-7. Specications” (page 43)).
The FineContrast function allows the user to select the display mode optimum to the displayed image.
- The Paper mode reproduces a printed paper effect on the monitor.
See To select the display mode (FineContrast Mode)” (page 15).
The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen using the mouse and keyboard is
included
See “1-3. EIZO LCD Utility Disk” (page 10).
- EyeCare Filter
Texture of the paper is reproduced by displaying a translucent image in the foreground of the desktop.
By using this function with the Paper mode, the screen looks more like paper.
See To select the display mode (FineContrast Mode)” (page 15).
Supports the power management software “EIZO EcoView NET”
For more information, refer to our web site (http://www.eizo.com).
Power saving function
Suppressing the power consumption
*2
reduces the carbon dioxide emissions. This product is equipped with power saving
function.
- 0 W power consumption when the main power is off
Equipped with main power switch.
When the monitor is not required, the power supply can be shut off using the main power switch.
- Auto EcoView
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably. Excessively high brightness may increase power consumption and cause
unwanted environmental effects. It may also lead to fatigue of your eyes. Use the Auto EcoView to reduce the
brightness.
See “4-3. Enabling / Disabling Automatic Brightness Adjustment” (page 27).
- EcoView Sense
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, the monitor shifts to the power saving mode automatically and does not display the images on the screen.
Therefore, the function reduces the power consumption. The sensitivity and time until the power saving mode is
activated can be set according to the monitor usage environment and movement of the user.
See “4-4. Setting the power saving mode when a person leaves the monitor” (page 28).
*2 Reference values:
Maximum power consumption: 67 W (Brightness Max., when a USB device is connected, speaker working, at
default settings)
Standard power consumption: 24 W (Brightness 120 cd/m
2
, when no USB device is connected, speaker not working,
at default settings)
Supports portrait and landscape formats
Displays HDCP (High-bandwidth Digital Protection) protected contents.

Table of Contents

Other manuals for Eizo FlexScan EV2736W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FlexScan EV2736W and is the answer not in the manual?

Eizo FlexScan EV2736W Specifications

General IconGeneral
3DNo
Pixel pitch0.233 x 0.233 mm
Aspect ratio16:9
Response time6 ms
Display diagonal27 \
Display technologyLED
Viewable size, vertical335.6 mm
Contrast ratio (dynamic)-
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal596.7 mm
Display brightness (typical)300 cd/m²
Supported graphics resolutions2560 x 1440
HDCPYes
USB hub version2.0
DVI-D ports quantity1
Headphone connectivity3.5 mm
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity2
RMS rated power2 W
Number of OSD languages9
Panel mounting interface100 x 100 mm
Power consumption (max)67 W
Power consumption (standby)- W
Power consumption (typical)24 W
Power consumption (PowerSave)0.5 W
CertificationTCO Displays 6.0, ECO Sense Gold, ISO9241-307, TUV/GS, c-Tick, CE, CB, cTUVus, FCC-B, TUV/S, VCCI-B, RoHS, WEEE, CCC, GOST-R
Product colorGray
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesEPEAT Gold, ENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)65 mm
Width (without stand)640 mm
Height (without stand)379 mm
Weight (without stand)7300 g

Related product manuals