INSTALLATION
24/64
EN
– insert the air intake pipe (8) and secure it using a pipe clamp (9), not supplied
– in case of conventional ue applications remove snorkel and air conveyor (10) and replace
with the conventional ue carter (11) supplied.
9
8
11
10
Fig. 16
4.6 Removing and tting the burner cover
– To remove the burner cover, loosen the two screws (1) and then slide out the burner cover (2)
taking care not to damage it.
– To ret it, invert the procedure above.
2
B
1
1
A
Fig. 17