Settin Surface Controls
SETTINGPOWERBOOSTFEATURE
[] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Your induction cooktop is equipped with
a Power Boost feature on each cooking
zone. The Power Boost feature is used to
bring large quantities of water or food to
cooking temperature at the fastest speed
possible. The Power Boost feature will
give you up to 139% power output for a
maximum of 10 minutes.
[] [] [] [] [] [] []
To Turn ON the Power Boost Feature:
Press the ON OFF pad to turn on the cooking
zone you want to set to Power Boost.
Press the "hi +" key pad and the PB will be
shown in the display (figure 1).
POWERSHARING
[] [] [] [] [] [] [] [] _ [] []
Fig. 2
Figure 1
To set the Power Boost, press hi +
when the zone is first turned on.
[] [] [] [] [] [] [] [] [] [] []
Your cooktop is equipped with four cooking zones within two
heating sections: right and left. Each section is powered by one
induction inverter. The two cooking zones in the right and left
section share the power of one inverter.
If you are cooking in both zones of a heating section, the last zone
that began to heat will cook at the power setting you selected.
The other zone will experience a slight decrease from its power
setting.
POWER SHARING TIPS: Remember to select the power setting
last for the cooking zone you want to maintain at full setting heat.
To maintain full setting heat for two items, place one item on a
zone in one section (left side), and the other item on a zone in
another section (right side).
OPERATIONALNO SES
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The electronic processes involved with Induction Cooking create some unusual background
noises. These noises are normal and part of the Induction Cooking process.
Please note that these noises are more noticeable while cooking at the Power BOOST level.
Very loud noises are not part of normal Induction Cooking.
To Next Page
Loading...
Need help?
General
