SOI 04.05 FV 5/57 599 36 62-62
GENERAL PRECAUTIONS
- These appliances are designed to operate using natural gas (methane) and LPG.
The appliances are factory-set for use with natural gas (methane). If a different type of gas is utilized (such
as LPG), the hob can be re-calibrated by replacing the gas nozzles.
- It is essential to ensure that there is adequate air circulation around all gas appliances.
Inadequate ventilation, as well as causing the appliance to malfunction, may also result in a lack of
oxygen that might be hazardous for persons.
- Installation and connection to the gas and electricity circuits must be carried out by qualified personnel in
compliance with all current safety legislation.
- After being in use for a short time, and for some time after switching off, the cooking areas and the
surrounding surface will remain very hot.
A pilot lamp located on the hob remains lit until these cool down.
In order to avoid serious burns, it is important to ensure that no person touches the surface while
the pilot lamp is lit.
- Do not switch on the burners without pans in the cooking areas, otherwise the hob may overheat and,
after a time, the burner will switch off.
To Next Page
Loading...
Need help?
General
