1
2
3
4
0209 3
4
2
3
4
01106073
Page
Notice
Date
OPERATING
HANDBOOK
Locking and tagging procedure
A red insert at the beginning of this instruction handbook schematically shows the locking
and tagging procedure described below. If you wish, you can detach this insert and display it
close to the machine to remind maintenance personnel of the safety instructions.
Put the main switch
to Off and lock the
handle with a padlock
in one of the three
holes provided for this
purpose.
Always respect items
2, 3 and 4 carefully
before doing any re-
pair or maintenance
work on the machine.
Open the fi xed protec-
tors (casings, doors)
with the key provided
or a special tool.
Close and carefully
lock the fi xed protec-
tors.
Unlock the stop
valves and the
main switch.
Do the maintenance.
Close the stop valves for
the other supplies
(steam,gas, ther-
mal fl uid, com-
pressed air) to stop
and lock their han-
dle with a padlock.
4. Safety
To Next Page
Loading...
Need help?
General
