Installation manual Laser scanne
D-ID: V1_3 – 06.19 Changes can be made without further notification! 2
1 Preface
These operating instructions must be available on site at all times. It should be read thoroughly by all
persons who use, or service the appliances. Improper usage or servicing or ignoring the operating
instructions can be a source of danger for persons, or result in material damage. If the meaning of any
part of these instructions isn’t clear, then please contact ELKA-Torantriebe GmbH u. Co. Betriebs KG
(hereinafter called "ELKA")before you use the appliance.
This applies to all setup procedures, fault finding, disposal of material, care and servicing of the
appliance. The accident prevention regulations and applicable technical regulations (e.g. safety or
electrical) and environment protection regulations of the country in which the appliance is used also
apply.
All repairs on the appliances must be carried out by qualified persons. ELKA accepts no liability for
damage which is caused by using the appliance for purposes other than those for which it is built.
ELKA cannot recognise every possible source of danger in advance. If the appliance is used other than
in the recommended manner, the user must ascertain that no danger for himself or others will result
from this use. He must also ascertain that the planned use will have no detrimental effect on the
appliance itself. The appliance should only be used when all safety equipment is available and in
working order. All faults which could be a source of danger to the user or to third persons must be
eliminated immediately. All warning and safety notices on the appliances must be kept legible.
All electrical periphery equipment which is connected to the appliance must have a CE Mark, which
ensures that it conforms to the relevant EEC regulations. Neither mechanical nor electrical alterations
to the appliance, without explicit agreement of the manufacturer, are allowed. All alterations or
extensions to the appliance must be carried out with parts which ELKA have defined as suitable for
such alterations, and be carried out by qualified personnel. Please note that with any alteration of the
product, no matter whether mechanical or electrical, the warranty expires and the conformity is
revoked. Only the use of ELKA accessories and original ELKA spare parts is allowed. In case of any
contravention ELKA disclaims liability of any kind.
INFORMATION!
The operation of the system within CEN countries must also be conformant with the European safety-
relevant directives and standards.
We reserve the right to make technical improvements without prior notice.
To Next Page
Loading...
Need help?
General
