Regulatory compliance
63
Specifications
• EN61000-3-2/JEIDA (European and Japanese Harmonics
Spec)
• EN61000-3-3
Canadian requirements
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations, ICES-003
Class A.
Laser compliance
This equipment contains Class 1 laser products and complies with
FDA Radiation Performance Standards, 21 CFR Subchapter I and the
international laser safety standard IEC 825-2.
Use only optical transceivers that are qualified by Brocade
Communications Systems, Inc. and comply with the FDA Class 1
radiation performance requirements defined in 21 CFR Subchapter
I, and with IEC 825-2. Optical products that do not comply with
these standards might emit light that is hazardous to the eyes.
RTC battery
Do not attempt to replace the real-time clock (RTC) battery. There is
danger of explosion if the battery is incorrectly replaced or
disposed of. Contact your switch supplier if the real-time clock
begins to lose time.
Electrical safety
This switch might have more than one power cord. To reduce the
risk of electric shock, disconnect both power cords before
servicing.
To Next Page
Loading...
Need help?
General
