Emerson FISHER FIELDVUE DLC3010 User Manual

Instruction Manual
D102748X012
DLC3010 Digital Level Controller
Introduction and Specifications
May 2018
12
Table 1‐6. Caged Displacer Sensors
(1)
TORQUE TUBE
ORIENTATION
SENSOR
STANDARD CAGE, HEAD,
AND TORQUE TUBE ARM
MATERIAL
EQUALIZING CONNECTION
PRESSURE RATING
(2)
Style Size (NPS)
Torque tube
arm rotatable
with respect to
equalizing
connections
249
(3)
Cast iron
Screwed 1‐1/2 or 2
CL125 or CL250
Flanged 2
249B, 249BF
(4)
Steel
Screwed or optional socket weld 1‐1/2 or 2 CL600
Raised face or optional ring‐type joint
flanged
1‐1/2
CL150, CL300, or
CL600
2
CL150, CL300, or
CL600
249C
(3)
316 stainless steel
Screwed 1‐1/2 or 2 CL600
Raised face flanged
1‐1/2
CL150, CL300, or
CL600
2
CL150, CL300, or
CL600
249K Steel
Raised face or optional ring‐type joint
flanged
1‐1/2 or 2 CL900 or CL1500
249L Steel Ring‐type joint flanged 2
(5)
CL2500
1. Standard displacer lengths for all styles (except 249) are 14, 32, 48, 60, 72, 84, 96, 108 and 120 inches. The 249 uses a displacer with a length of either 14 or 32 inches.
2. EN flange connections available in EMA (Europe, Middle East and Africa).
3. Not available in EMA.
4. The 249BF available in EMA only. Also available in EN size DN 40 with PN 10 to PN 100 flanges and size DN 50 with PN 10 to PN 63 flanges.
5. Top connection is NPS 1 ring‐type joint flanged for connection styles F1 and F2.
Table 1‐7. Cageless Displacer Sensors
(1)
Mounting Sensor
Standard Head
(2),
Wafer
Body
(6)
and Torque Tube
Arm Material
Flange Connection (Size) Pressure Rating
(3)
Mounts on
top of vessel
249BP
(4)
Steel
NPS 4 raised face or optional ring‐type joint CL150, CL300, or CL600
NPS 6 or 8 raised face CL150 or CL300
249CP 316 Stainless Steel NPS 3 raised face CL150, CL300, or CL600
249P
(5)
Steel or stainless steel
NPS 4 raised face or optional ring‐type joint
CL900 or 1CL500
(EN PN 10 to DIN PN 250)
NPS 6 or 8 raised face
CL150, CL300, CL600, CL900,
CL1500, or CL2500
Mounts on
side of vessel
249VS
WCC (steel) LCC (steel), or
CF8M (316 stainless steel)
For NPS 4 raised face or flat face
CL125, CL150, CL250, CL300,
CL600, CL900, or CL1500
(EN PN 10 to DIN PN 160)
WCC, LCC, or CF8M For NPS 4 buttweld end, XXZ CL2500
Mounts on top of
vessel or on
customer
supplied cage
249W
WCC or CF8M For NPS 3 raised face CL150, CL300, or CL600
LCC or CF8M For NPS 4 raised face CL150, CL300, or CL600
1. Standard displacer lengths are 14, 32, 48, 60, 72, 84, 96, 108, and 120 inches.
2. Not used with side‐mounted sensors.
3. EN flange connections available in EMA (Europe, Middle East and Africa).
4. Not available in EMA.
5. 249P available in EMA only.
6. Wafer Body only applicable to the 249W.

Emerson FISHER FIELDVUE DLC3010 Specifications

General

Brand	Emerson
Model	FISHER FIELDVUE DLC3010
Category	Controller
Language	English