16
EN
FREEZE
SLEEP
BACK
MENU INFO
CHVOL
SAP
MUTE
456
789
0.
123
SOURCE
FORMAT
ECO
PREV CH
OK
salut!
hola!
hi!
11.1 Video Component
HDMI1HDMI2HDMI3
WATCHING TV
Switching Each Input Mode
can easily switch with the remote control
between TV (ATSC or NTSC) and external devices when they are connected to the unit.
Press SOURCE or CH
K
repeatedly to cycle through the input modes.
Source
TV
Video
Component
HDMI1
HDMI2
HDMI3
•
Pressing CH
L
reverses the direction of the input modes.
DTV / TV channel
e.g.)
(or PC input)
Sleep Timer
can be set to automatically turn off the unit after an incremental period of time.
Press SLEEP repeatedly to change the amount of time (increases
the time by 30 minutes up to 120 minutes) until shut off.
Press SLEEP once to call up the display for checking the remaining time.
•
To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is displayed.
Sound Functions
describe how to change the audio or the audio language as well as the volume.
Volume Adjustment
Use VOL
to adjust the volume.
will be displayed for a few seconds when adjusting the volume.
Silence Mode
Press MUTE to turn off the sound temporarily.
will be is displayed for a few seconds.
•
Press MUTE again or VOL
to recover the original
volume.
Switching Audio Mode
AT S C
Press SAP repeatedly to cycle through the available audio
languages.
•
Available languages differ depending on the broadcast.
•
[Other] is displayed when the audio language cannot be
acquired, or the acquired languages are other than English,
Spanish or French.
English 1 / 3
NTSC
Press SAP to display the currently selected audio mode.
While receiving an MTS broadcast, press repeatedly to cycle
through the available audio channel.
11
SAP /
STEREO
e.g.) When all audio are available
SAP / STEREO SAP / MONO
SAP / STEREO
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
Sleep 120min.
Volume 30
Mute
To Next Page
Loading...
Need help?
General
