Emerson LC260EM1 User Manual

English
17
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
11.1
Freeze Mode
can freeze the image shown on the TV screen for 5 minutes.
Press FREEZE to freeze the image.
•
The sound output will not be paused.
•
To cancel freeze mode, press any buttons except
y
.
TV Screen Display Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
modes can be selected for PC input signal.
Press FORMAT
repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal
Wide
4:3 Movie Expand
Zoom
Normal
displays a 16:9 picture at its original size.
4:3
displays a 16:9 picture at a 4:3 size; the picture
is shortened horizontally. Sidebars appear on both
edges of the screen.
Movie Expand
displays a 16:9 picture that is
vertically stretched to fi ll the screen. This only crops
out the top of the picture.
Zoom
displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide
displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
For 4:3 video signal
Normal
Wide
16:9 Movie Expand
Zoom
Normal
displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9
displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fi ll the screen.
Movie Expand
displays a 4:3 picture at a 16:9 size;
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom
displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to fi ll
the screen. This crops out the top and bottom of the
picture.
Wide
displays the picture with its center at the
original size and the edges stretched horizontally to fi ll
the screen.
For PC input signal through
HDMI1
Input mode
Normal Dot By DotFull
Normal
displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full
displays a picture that is stretched out of
proportion horizontally to fi ll the screen.
Dot By Dot
displays a picture in its original size.
Channel Selection
Select channels by using CH
K
/
L
or the Number buttons.
•
To select the memorized channels, use CH
K
/
L
or the Number buttons.
•
To select the non-memorized channels, use the Number buttons.
To use the Number buttons
AT S C
-
When selecting digital channel 11.1
Be sure to press
•
before entering the subchannel number.
1
OK
1 1
.
Press PREV CH to return to the previously channel.
NTSC
-
When selecting cable or analog channel 11
1
OK
1
Note
•
[No Signal] will appear on the TV screen after the subchannel broadcast is over.
•
[Audio only program] message will appear on the TV screen, when you receive only sound signal.
Freeze

Emerson LC260EM1 Specifications

General

Brand	Emerson
Model	LC260EM1
Category	LCD TV
Language	English