Standards
GB3836.1-2010, GB3836.8-2014
Markings
Ex nA IIC T5 Gc
Special Condition for Safe Use (X):
1. This apparatus is not capable of withstanding the 500V r.m.s insulation
test required by Clause 6.5.1 of GB3836.8-2014.
Combinations
K7 Combination of E7, I7, and N7
K8 Combination of E8, I1, and N1
4.2 Rosemount 3051G Pressure Transmitter
European Directive Information
A copy of the EC Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EC Declaration of
Conformity can be found at Emerson.com/Rosemount.
Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine that
the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
North America
Certificate
E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 0T2H0.AE
Standards
FM Class 3600 - 2011, FM Class 3615 - 2006, FM Class 3616 -
2011, FM Class 3810 - 2005, ANSI/NEMA 250 - 2008
Markings
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III; T5(–
40 °C ≤ T
a
≤ +85 °C); Factory Sealed; Type 4X
I5 USA Intrinsic Safety (IS) and Nonincendive (NI)
Certificate
1Q4A4.AX
Standards
FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3611 -
2004, FM Class 3810 - 2005, ANSI/NEMA 250 - 2008
Markings
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III; DIV 1
when connected per Rosemount drawing 03031-1019; NI CL 1,
DIV 2, GP A, B, C, D; Temp code T4; Type 4x; Factory Sealed
Special Conditions for Safe Use (X):
Quick Start Guide February 2019
26 Emerson.com/Rosemount
To Next Page
Loading...
Need help?
General
